[c-nsp] Interface not reporting accurate bandwidth statistics via SNMP + FIBerrors in log

[cisco-nsp at mikewesson.com]

> -----Original Message-----
> From: chance.newkirk at gmail.com 
> [mailto:chance.newkirk at gmail.com] On Behalf Of Frances Albemuth
> Sent: September 24, 2006 8:53 PM
> To: cisco-nsp at mikewesson.com
> Cc: Garry Glendown; cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Interface not reporting accurate 
> bandwidth statistics via SNMP + FIBerrors in log
> 
>   Is there a possibility that for whatever reason you've 
> begun querying the 32 bit counters instead of the 64 bit 
> counters? An OC-48 running near capacity would certainly 
> invalidate statistics provided by 32-bit counters unless 
> you're pulling data at an abnormally rapid clip (i.e., 
> sampling before counters roll over).
> 
>   -FC

HI Frances, the query is 64 bit.  But you mentioned an "abnormally rapid
clip", currently I am polling the router at one minute intervals and had not
experienced any kind of issue with the counters not being able to roll over
fast enough.  Maybe I'll try a 5 minute interval and see if that does the
trick.  Thanks for your input.

Mike