[c-nsp] Circuit provisioning between an ONS 15454 and a non-Cisco NE?

Phil Bedard philxor at gmail.com
Fri Apr 13 10:12:52 EDT 2007


If you do a search on "Ethernet Manual Cross-connects" you'll find
some information on manually connecting an Ethernet port to an outgoing
STS circuit.

Phil


On Apr 13, 2007, at 8:37 AM, Aaron Daubman wrote:

> Greetings,
>
> I'm looking to provision circuits between two or more ONS15454s - CTC
> makes this insanely easy between Cisco NEs, however, the catch here is
> that I'd like to also be able to provision circuits to non-Cisco NEs
> and even test gear...
>
> So far my CCO searches haven't turned up a how-to (what search phrase
> would one use for this exactly?).
>
> I'm hoping somebody more familiar with daily ONS Ops will be able to
> point me to a how-to on configuring cross-connects to allow circuit
> termination on non-Cisco Kit...  The current case In particular is to
> provision a STS-3-7v VCG from one ONS's CE-1000-4, across a second ONS
> and finally terminate it on an Anritsu MP1590B...  (and if there were
> some way to do this without having to re-familiarize myself with TL1,
> that would be even better...)
>
> (ce-1000-4)[ONS](oc192)-----(oc192)[ONS](oc48)-----(oc48)[MP1590B]
>
> Any pointers?
>
> Thanks,
>      ~Aaron
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/







More information about the cisco-nsp mailing list