[c-nsp] TFTP server for LWAPP to Autonomous downgrade

[A.L.M.Buxey at lboro.ac.uk]

Hi,

> Documentation on CCO says to press the RESET button whilst booting until the 
> middle light glows red - after that, the AP will set its IP address to 10.0.0.1 
> and request tftp://255.255.255.255/<filename>.
> 
> This works fine, my TFTP server (10.0.0.2, temporary address) responds to the 
> TFTP GET request, but the AP fails to download the image, timing out very quickly.
> 
> Has anyone else successfully 'downgraded' from Lightweight to Autonomous (IOS) 
> image?  Can anyone guide me to getting my IOS functionality back?

connect serial port console. press reset button until you see message to let go
on serial output. now transfer image using xmodem (after deleting thin IOS
to make room!)

alan