[c-nsp] Reboot on software crash instead of rommon (7600)

[Peter Salanki]

Hi,

When my 7600s sometimes crash due to software errors, they don't  
reboot but just stays in rommon until a technician can reach the site  
and power-cycle the box. Is there some way to force the box to always  
reboot upon software error?

I.e

Feb  7 11:47:19.389: %CPU_MONITOR-3-PEER_EXCEPTION: CPU_MONITOR peer  
has failed due to exception , reset by [5/0]

%Software-forced reload

then the box was put into rommon.

Sincerely

Peter Salanki
Chief Network Engineer
Bahnhof AB (AS8473)
www.bahnhof.se
Office: +46855577132
Cell: +46709174932


-------------- next part --------------
A non-text attachment was scrubbed...
Name: PGP.sig
Type: application/pgp-signature
Size: 188 bytes
Desc: This is a digitally signed message part
Url : https://puck.nether.net/pipermail/cisco-nsp/attachments/20070207/f89d2492/attachment.bin