[c-nsp] Different SUPs in 7604

[Yevgeniy Voloshin]

Is it possible to use two different SUPs 32 - WS-SUP32-GE-3B and
WS-SUP32-10GE-3B in one 7604?

I found only this info:
http://www.cisco.com/en/US/products/hw/routers/ps368/products_data_sheet0900aecd8027cc3e.html
Supervisor support: Cisco Catalyst 6500 Supervisor Engine 32 (WS-SUP32-GE-3B
and WS-SUP32-10GE-3B), Cisco Catalyst 6500 Supervisor Engine 720
(WS-SUP720-3B and WS-SUP720-3BXL), and the new Cisco Route Switch Processor
720 (RSP720-3C and RSP720-3CXL)
The Cisco 7604 can be configured two ways: with a single supervisor engine
and up to three line cards, or with dual supervisor engines and up to two
line cards for high availability and redundancy

I need 2x10GE and 8x1GE ports.

TIA!

---
Yev.