[c-nsp] Different SUPs in 7604

[Peter Salanki]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

This will work.

21 feb 2007 kl. 13.45 skrev Yevgeniy Voloshin:

> Is it possible to use two different SUPs 32 - WS-SUP32-GE-3B and
> WS-SUP32-10GE-3B in one 7604?
>
> I found only this info:
> http://www.cisco.com/en/US/products/hw/routers/ps368/ 
> products_data_sheet0900aecd8027cc3e.html
> Supervisor support: Cisco Catalyst 6500 Supervisor Engine 32 (WS- 
> SUP32-GE-3B
> and WS-SUP32-10GE-3B), Cisco Catalyst 6500 Supervisor Engine 720
> (WS-SUP720-3B and WS-SUP720-3BXL), and the new Cisco Route Switch  
> Processor
> 720 (RSP720-3C and RSP720-3CXL)
> The Cisco 7604 can be configured two ways: with a single supervisor  
> engine
> and up to three line cards, or with dual supervisor engines and up  
> to two
> line cards for high availability and redundancy
>
> I need 2x10GE and 8x1GE ports.
>
> TIA!
>
> ---
> Yev.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

Sincerely

Peter Salanki
CTO
Bahnhof AB (AS8473)
www.bahnhof.se
Office: +46855577132
Cell: +46709174932


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (Darwin)

iD8DBQFF3EBFiQKhdiFGiogRAhpzAKCRW5yLx2B6JxM5zwZvhh/lq9MAngCdHZXz
UCSZtYwMOdTqFEM50/stGCU=
=U+j9
-----END PGP SIGNATURE-----