[c-nsp] Different SUPs in 7604

[Mohacsi Janos]

On Wed, 21 Feb 2007, Peter Salanki wrote:

>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> This will work.


What about the redundancy? What supervisor redundancy supported? Our Cisco 
support told SUP32-GE-3B and SUP32-10GE-3B is a non working redundancy 
setup. They have to be completely identical....

Regards,
 	Janos Mohacsi

>
> 21 feb 2007 kl. 13.45 skrev Yevgeniy Voloshin:
>
>> Is it possible to use two different SUPs 32 - WS-SUP32-GE-3B and
>> WS-SUP32-10GE-3B in one 7604?
>>
>> I found only this info:
>> http://www.cisco.com/en/US/products/hw/routers/ps368/
>> products_data_sheet0900aecd8027cc3e.html
>> Supervisor support: Cisco Catalyst 6500 Supervisor Engine 32 (WS-
>> SUP32-GE-3B
>> and WS-SUP32-10GE-3B), Cisco Catalyst 6500 Supervisor Engine 720
>> (WS-SUP720-3B and WS-SUP720-3BXL), and the new Cisco Route Switch
>> Processor
>> 720 (RSP720-3C and RSP720-3CXL)
>> The Cisco 7604 can be configured two ways: with a single supervisor
>> engine
>> and up to three line cards, or with dual supervisor engines and up
>> to two
>> line cards for high availability and redundancy
>>
>> I need 2x10GE and 8x1GE ports.
>>
>> TIA!
>>
>> ---
>> Yev.
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> Sincerely
>
> Peter Salanki
> CTO
> Bahnhof AB (AS8473)
> www.bahnhof.se
> Office: +46855577132
> Cell: +46709174932
>
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.2.2 (Darwin)
>
> iD8DBQFF3EBFiQKhdiFGiogRAhpzAKCRW5yLx2B6JxM5zwZvhh/lq9MAngCdHZXz
> UCSZtYwMOdTqFEM50/stGCU=
> =U+j9
> -----END PGP SIGNATURE-----
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>