[c-nsp] Problem with paste large ACLs

[Alex]

Jeroen,
It might be the terminal emulator issue rather than router problem. Try to 
configure character-send delay and/or line-send delay in Your emulator of 
choice, SecureCRT supports both (Options->Global Options->Advanced).
Rgds
Alex

----- Original Message ----- 
From: "Jeroen Vos" <Jeroen.Vos at omroep.nl>
To: <cisco-nsp at puck.nether.net>
Sent: Friday, January 12, 2007 9:33 AM
Subject: [c-nsp] Problem with paste large ACLs


> Hello,
>
> We have some problem with paste large ACLs >50 lines to a cisco 6500 (
> and others types also). It seems that after 50 lines some sort of buffer
> is filled and then, no rules are accepted anymore.
>
> We use the console via a terminalserver (2600 type) with standard
> defaults.
>
> line con 0
> logging synchronous
> transport preferred none
> transport output telnet
>
> There is a workarround; use some sort of 'slow' paste. But are there
> other solutions for this problem ?
>
>
> Jeroen
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>