[c-nsp] HSRP Configuration question

[Collins, Richard (SNL US)]

 That looks like normal behavior to me and is a valid way of removing an
interface.

-Richard

>------------------------------
>
>Message: 8
>Date: Wed, 31 Jan 2007 09:47:03 -0500
>From: "Paul Ryan" <Paul.Ryan at rci.rogers.com>
>Subject: [c-nsp] HSRP Configuration question
>To: <cisco-nsp at puck.nether.net>
>Message-ID:
>
<FCFF3B743691A44AA67AD00785055400412846 at rssesngtambf.rci.rogers.ca>
>Content-Type: text/plain;      charset="US-ASCII"
>
>Is this a bug - or is there a proper way to remove an interface from
>HSRP - basically I have 2 devices configured with interfaces that are
>part of the HSRP group - when I remove the interface by removing the
>"standby" config from the interfaces - the remaining interfaces in
other
>HSRP groups on that devices go into an ACTIVE/ACTIVE state ....
> 
> 
>interface GigabitEthernet0/1.21
> description west interface
> encapsulation dot1Q 21
> ip address 192.168.16.131 255.255.255.192
> no ip redirects
> no ip unreachables
> ip inspect OAMP in
> standby 9 ip 192.168.16.129
> standby 9 timers msec 200 msec 600
> standby 9 priority 105
> standby 9 preempt
> standby 9 mac-address 0000.0c07.ad02
> standby 9 track GigabitEthernet0/0
> standby 9 track GigabitEthernet0/1
>!
>!
>fw06.core-east#sho standby brief
>Interface   Grp Prio P State    Active addr     Standby addr    Group
>addr     
>Gi0/1.19    2   100  P Active   local           unknown
>192.168.15.68  
>Gi0/1.20    1   100  P Active   local           unknown
>192.168.15.1   
>Gi0/1.23    5   100  P Active   local           unknown
>192.168.18.113 
>
> 
>regards,
> 
>
>Paul
>
> 
>