[c-nsp] PBR on 3750

[Azher Amin]

Hi,

I am trying to implement the following PBR on 3750 but somehow when i 
issue the command 'ip policy route-map hpc' on the routed port of the 
switch it accept it but in sh running it doesn't appear, details are 
below. Plz suggest what can be wrong.

Regards
-Azher

L3#sh runn
ip routing
..........
route-map hpc permit 10
 match ip address 21
 set ip next-hop 10.10.4.70
.........
interface GigabitEthernet1/0/25
 no switchport
 ip address 192.168.10.17 255.255.255.248