[c-nsp] Sup32 Active Standby Switchover

[xdsgrrr at consultcommerce.com]

Ok my ospf coverge in 1-2 seconds in case of fiber cut ot upluging 
cable ,  ldp too but when i go and make  redundancy force-switchover
it take's 30 seconds to converge ,  strange i mean this is unacceptible 
for rtp protocols :)
all advices are appreciated .

On 7/10/2007, "Ian McDonald" <iam at st-andrews.ac.uk> wrote:

>xdsgrrr at consultcommerce.com wrote:
>> Yes , im running sso/nsf with SUP32 MSFC2 and all protocols are
>> configured to be nsf aware include ldp  ,osps , bgp and cef  by default
>> and i want to minimize time for switchover now the time is 30 seconds ,
>> and this is inaceptible for me if there is a some way to tune this to
>> more acceptible 1-2 seconds will be great .
>
>Ours are effectively local lan traffic, and resync eigrp within a few
>seconds. I'm not sure how quickly other protocols sync up. I've not done
>any tuning of anything to get a few-second switchover. I presume more
>"involved" routing protocols take a bit longer.
>
>--
>ia