[c-nsp] Cisco IOS versions that support switchport?

[Pelle]

On Tue, Jun 26, 2007 at 11:16:39PM +0300, Hank Nussbacher wrote:

> Where can I find a Cisco page that shows which IOS versions that
> support switchport capability (specifically for 871, 1841, 2501, 2514
> and 2610)?

871:  yes for the LAN-ports, no for the WAN port
1841: yes, if equipped with a EtherSwitch-module, e.g. WIC-4ESW or
      HWIC-4ESW
25xx: no
2610: maybe, if equipped with the EtherSwitch-module WIC-4ESW and it's
      supported (don't know that)

in general, all (H)WIC's which are branded as "Ethernet Switching
module" does "switchport". in addition the routers in the 87x series and
180x is shipped with this module integrated.

BUT, the Vlan-range supported are the old ISL-range (1-1005). if you use
a pre 12.4(11)T IOS, all Vlans are configured in the ancient Vlan
database. from 12.4(11)T transparent mode is supported.

-- 
pelle
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 2327 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-nsp/attachments/20070626/681e0a34/attachment-0001.bin