[c-nsp] Ethernet over T1 solution

[Brad Henshaw]

Justin Shore wrote:

> Does anyone have any suggestions for a scalable and inexpensive Ethernet 
> over T1 solution?

RAD's RICi-4T1/8T1 can aggregate multiple T1 services and provide
a single Fast Ethernet port to the user.
The FCD-T1 boxen can terminate a single T1.

These can be aggregated at the CO using an Egate-100 which terminates
the services via channelized STM-1 onto a GigE interface or two.

If you need to bring the T1's to a central point on an interface
per circuit then you may be able to use the RICi-16 to do this.

This is probably getting a little off-topic for a Cisco list.

Regards,
Brad