[c-nsp] unsuppress-map : is this correct?

[Tassos Chatzithomaoglou]

According to:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hirp_r/rte_bgh2.htm#wp1115114

"To selectively advertise routes previously suppressed by the aggregate-address command, use the 
neighbor unsuppress-map command in address family or router configuration mode".

Which, if i understand correctly, means that whatever route-map you use in unsuppress-map, it only 
influences the prefixes that were suppressed by using the "aggregate-address" command.

I have a case where i use this command and although the specific network i define in the route-map 
is correctly unsuppressed, all the other networks (which were not being summarized, but were being 
advertised) are now suppressed. Am i doing something wrong?

-- 
Tassos