[c-nsp] 7304 OC12 issue

[Aaron]

What does the show controller pos show?

Aaron

On 10/29/07, Tim Murfy <timothy.murfy at gmail.com> wrote:
>
>    We are experiencing a strange issues with our new 7304 and a new OC-12
> circuit. When we bring the circuit up with a full BGP table, we see
> ignored
> errors on the POS interface every few seconds.  The only errors we see are
> the ignored errors, and the match the input error number exactly.  The
> show
> controllers show nothing wrong.  This is happening when traffic patters
> are
> only around 40 Mbps/8K pps.  We have turned everything off that could be
> turned off on the interface, including service policy, ACL's, netflow.,
> and
> it still showed this symptom.  Has anyone seen anything similiar?  Its a
> cisco 7304 with NPE-G100 using the SPA adapter with the OC12 card.
>
> Thanks,
>
> Tim
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>