[c-nsp] 6704-10GE bug ? [NC]

[Jared Mauch]

On Wed, Oct 31, 2007 at 02:57:55PM +0000, david.ponsdesserre at sgcib.com wrote:
> Thanks for this Jared.  As you will see below i think we are "far away" to 
> overflow the Tcam on this switch . 

	You should be able to re-enable cef by doing:

conf t
ip cef distributed

	if that doesn't work, what error message do you get?

	Also, on your 6704 linecards, do you have CFC?  What rommon
do those have?

(sh mod)

	You can fetch the images here:

http://www.cisco.com/cgi-bin/tablebuild.pl/cat6000-rommon

	(make sure you get the right ones ;))

	c2lc-rm2.srec.122-18r.S1

	works for the CFC and DFC.  Cisco has been shipping most
of them with the 14r image.

	It's worthwhile to upgrade your rommon on your MFSC, SUP
and CFC/DFC linecards as there are some bugs related to dual-sup, etc.
that will help with keeping the hardware in the right state...

	- Jared

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.