[c-nsp] cap'ing each host/ip to bw limits

[Masood Ahmad Shah]

Packeteer packet shaper is best....Go for it...


Regards,
Masood Ahmad Shah

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Phil Bedard
Sent: Thursday, September 13, 2007 9:08 PM
To: matthew zeier
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] cap'ing each host/ip to bw limits

Well you can limit the bandwidth based on application, such that peer to
peer or ftp downloads are not maxing out all of your available  
bandwidth.    There are some good NAC (network access control) inline  
devices from places like Elacoya or Packeteer which can limit on per- user
and per-application, if you need that kind of granularity.

Phil


On Sep 13, 2007, at 11:54 AM, matthew zeier wrote:

> So I wonder if there's an alternative method to prevent over 
> saturation (or at least reduce it's impact on everyone else)...
>
> Phil Bedard wrote:
>> Yes, unless they are static IP addresses and you configure policing 
>> for every single individual IP, but that doesn't sound like much 
>> fun...
>>
>> Phil
>>
>>
>> On Sep 13, 2007, at 9:29 AM, matthew zeier wrote:
>>
>>>
>>>
>>> Phil Bedard wrote:
>>>> What platform are you using?  The 6500/7600 w/SUP720 can do per- 
>>>> user microflow policing, which would probably accomplish what you 
>>>> are
>>>> after.   As for the router type platforms like the 7200/GSR I'm not
>>>> aware of any such feature outside of dial profiles.
>>>
>>> 3845 so I'm guessing I'm out of luck here.
>>
>>
>>
>>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/



_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/