[c-nsp] Catalyst WS-C3524-PWR-XL

[Tassos Chatzithomaoglou]

If i remember right, i think you have to enter "management" under the interface.

--
Tassos


Jason Berenson wrote on 26/4/2008 12:32 πμ:
> Greetings,
> 
> This is one of those questions that may seem obvious to others but the 
> answer just isn't apparent to me.  I have a Catalyst WS-C3524-PWR-XL at 
> a site with the default VLAN 1 and an IP on it for management.  I don't 
> have console access to it at this time.
> 
> I want to change the default VLAN to 122 and put an IP there so I can 
> manage it on a different VLAN.  Once I do:
> 
> interface VLAN122
>  ip address 192.168.122.250 255.255.255.0
>  no ip directed-broadcast
>  no ip route-cache
>  shutdown
> !
> 
> it immediately shuts it down.  I've tried a no shut as well as shutting 
> down VLAN 1 (had to do a reload in 2 to make sure it would come back).  
> Any ideas how to change the default VLAN remotely or do I have to do 
> this from the console?
> 
> Thanks,
> Jason
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>