[c-nsp] ASA 5510's to Redundant Switches?

[Prabhu Gurumurthy]

Michael K. Smith - Adhost wrote:
> Hello All:
> 
> Is it possible to have a pair of failover ASA 5510's participate in spanning tree across multiple inside interfaces so I can connection them up to redundant back-end switches.  Something like this (pardon the ASCII art).
> 
> 5510       5510
>  |\		/|
>  | \       / | 
>  |  \     /  |
> swi1 		swi2
> 
> Where the diagonal lines cross over to the other switch.  
> 
> By the way, I think the answer is "no" but I'm hoping there is some magical configuration on the 5510 side that will make this happen.
> 
> Regards,
> 
> Mike
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

We connect ASA 5520s to pair of stacked 3750 (we use it as a router) so that it 
gives us redundancy, don't know whether this helps you. Just a quick glance at 
your email I believe you are trying to connect 5510s to 2 L2only switches, which 
in theory should work, but I have no idea on how to run STP on the 5510s, if 
that is your question.

Prabhu
-