[c-nsp] RSPAN over IP on a 6500 SUP 2 + MSFC2

[Arie Vayner (avayner)]

Rafael,

The only way to run any kind of MPLS services with SUP2 is to use an OSM
module.

Arie 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Rafael Rodriguez
Sent: Wednesday, April 30, 2008 17:14 PM
To: Peter Rathlev; Phil Bedard
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] RSPAN over IP on a 6500 SUP 2 + MSFC2

 
Will this not work on SUP2s or is there just no silicon for the EoMPLS? 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Peter Rathlev
Sent: Wednesday, April 30, 2008 03:53
To: Phil Bedard
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] RSPAN over IP on a 6500 SUP 2 + MSFC2

On Tue, 2008-04-29 at 22:25 -0400, Phil Bedard wrote:
> He mentioned his network was made up of SUP2s and SUP32s.

You're right, hadn't seen that. :-) The Sup32 can do PFC EoMPLS, but not
the Sup2.

Regards,
Peter


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/