[c-nsp] WS-X4506-GB-T Ports not connected

[Sebastian Wiesinger]

* Sebastian Wiesinger <cisco-nsp at tracker.fire-world.de> [2008-08-26 12:30]:
> Hello,
> 
> I'm having a little problem here with a new Cisco 4510R-E. It's
> running the following configuration:

Problem solved. Someone hinted that I should not assume that the
linecard does have auto MDI/X detection. Which apparently it hasn't.
So connecting a crossover cable solved the problem.

I was under the impression that auto MDI/X was a feature present on
all linecards but it seems I was wrong. Or is there a way to turn this
on on a port? I looked over the commands for the port but didn't see
anything obvious..

Regards,

Sebastian

-- 
GPG Key-ID: 0x76B79F20 (0x1B6034F476B79F20)
'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE.
            -- Terry Pratchett, The Fifth Elephant