[c-nsp] 6500-sup-stdby

Pete S. pshuleski at gmail.com
Tue Nov 11 10:14:41 EST 2008


Also, make sure the flash was formatted by the chassis its currently in.
There was an issue where, if formatted in another chassis, the flash could
be read, but not booted from, resulting in a boot to rommon where you have
to manually enter the boot command.


--Pete


On Tue, Nov 11, 2008 at 1:15 AM, ambedkar <p_ambedkar at rediffmail.com> wrote:

>
> Hi, i am using cisco 6509 with two sup engines. sup1 is main and sup2
> is standby. The problem is sup2 is not booting automatically when the
> system is switched ON. it is going to rommon mode, where we have to
> type boot command so that it will boot. after booting, boot variable
> is missing. if we set the boot variable,it will show the boot variable
> but it is temporary.
>
> Again we switched OFF and ON, The same situation is there. i tried
> lot, please help me. some details are here...
>
> Before sup2:
>
> CAT_1> (enable) sh mod
> Mod Slot Ports Module-Type               Model               Sub
> Status
> --- ---- ----- ------------------------- ------------------- --- -----
> ---
> 1   1    2     1000BaseX Supervisor      WS-X6K-S2U-MSFC2    yes ok
> 15  1    1     Multilayer Switch Feature WS-F6K-MSFC2        no  ok
> 3   3    48    10/100BaseTX Ethernet     WS-X6348-RJ-45      yes ok
> 9   9    8     1000BaseX Ethernet        WS-X6408A-GBIC      no  ok
>
>
> After sup2:
>
> CAT_1> (enable) sh mod
> Mod Slot Ports Module-Type               Model               Sub
> Status
> --- ---- ----- ------------------------- ------------------- --- -----
> ---
> 1   1    2     1000BaseX Supervisor      WS-X6K-S2U-MSFC2    yes ok
> 15  1    1     Multilayer Switch Feature WS-F6K-MSFC2        no  ok
> 2   2    2     1000BaseX Supervisor      WS-X6K-S2U-MSFC2    yes
> standby
> 16  2    1     Multilayer Switch Feature WS-F6K-MSFC2        no  ok
> 3   3    48    10/100BaseTX Ethernet     WS-X6348-RJ-45      yes ok
> 9   9    8     1000BaseX Ethernet        WS-X6408A-GBIC      no  ok
>
>
> bye.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


More information about the cisco-nsp mailing list