[c-nsp] 7206VXR and CBWFQ

[Brian Turnbow]

Your pvc needs to be abr/vbr/cbr 
You can't do it on ubr

Regards

Brian 


 


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Networkers
Sent: venerdì 17 ottobre 2008 17.10
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 7206VXR and CBWFQ

 Whenever I try to apply the following I get an error message about how
CBWFQ can't be applied to subinterfaces.  What is the correct way to do
this?

Thanks,
Chris

class-map match-any VOIP
  match ip dscp ef 
  match  precedence 5
 class-map match-all CRITICAL
  match access-group 100

 policy-map MyCBWFQ
  class CRITICAL
   priority 48
  class VOIP
   bandwidth 320
   set precedence 6

vc-class atm MyClass
  ubr 1536
  encapsulation aal5mux ppp Virtual-Template5

interface Virtual-Template5
 ip unnumbered Loopback0
 service-policy output MyCBWFQ
 peer default ip address pool default
 ppp authentication pap callin

interface ATM2/0.1921 point-to-point
 pvc 1/1921 
  class-vc MyClass







_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/