[c-nsp] ME3750 Shaping

[Arie Vayner (avayner)]

Eric,

This should be possible.
Take a look here:
http://www.cisco.com/en/US/docs/switches/metro/catalyst3750m/software/re
lease/12.2_46_se/configuration/guide/swqos.html

Arie 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Eric Van Tol
Sent: Friday, September 12, 2008 16:59 PM
To: 'cisco-nsp at puck.nether.net'
Subject: [c-nsp] ME3750 Shaping

Hi all,
Does anyone know if the ME3750 can do egress shaping of a particular
queue to a limit of >40Mb/s?  If so, any examples anyone can share?  The
goal is to not only police on ingress at a certain limit (25M, 50M,
75M), but also to egress shape at the same limit.  I've got the inbound
policing just fine, but it seems that the method I found to shape will
only do a limit of about 40-50Mb/s.  I need to do this on not only
non-ES routed ports, but also on non-ES ports that have two VLANs
assigned to them, one of which is rate-limited/shaped and one that has
WRR with priority queuing.

Thanks,
evt
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/