[c-nsp] Static Route based on next hop reachable

[Aaron Riemer]

Hi Paul,

Take a look at Policy based routing with object tracking.

http://www.cisco.com/en/US/tech/tk364/technologies_configuration_example
09186a0080211f5c.shtml

Cheers,

Aaron
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Paul Stewart
Sent: Thursday, 18 September 2008 10:25 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Static Route based on next hop reachable

Hi there..

 

This is a bit of a long story .. But what we are looking for is to
create a
static route only if the next hop is reachable and directly connected.
is
this possible?

 

I seem to remember there is a way to do this via IP SLA statements where
if
a condition is met then do X

 

Can anyone enlighten me on this?  We have some clients connecting via
PPPOE
to a 7206VXR but now want to move towards load balancing where the
client
could connect to multiple devices in a round robin format.  The more
obvious
answer would be to create the routes via Radius but this has proven
difficult due to a proprietary system in use to create the radius users
file.

 

Thanks,

 

Paul

 

 

 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

LEGAL DISCLAIMER: This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.