[c-nsp] How to enable ssh o telnet via outside interface ASA

[Jorge Evangelista]

Hi folks

I want to configure my ASA for remote access via outside however it
configuration do not work, IP are fake for reasons security. My
configuration is

In the outside interface I have

interface Vlan2
 nameif outside
 security-level 1
 ip address 200.10.45.98 255.255.255.240

 telnet 200.100.50.0 255.255.255.0  outside
ssh 200.100.50.0 255.255.255.0 outside

Also, I do not have any ACL

In the logs I can  see:
 %ASA-4-402117: IPSEC: Received a non-IPSec packet (protocol= TCP)
Could you help me with this configuration?

Regards.

-- 
"The network is the computer"