[c-nsp] Shape users over quota

[Arie Vayner (avayner)]

Ed,

The best approach for this kind of services (and even more advanced,
like different policies for different protocols even if quota is
exceeded) could be implemented with the Cisco SCE product:
http://www.cisco.com/en/US/products/ps9591/index.html

smaller scale can be achieved with the SCE2020:
http://www.cisco.com/en/US/products/ps6151/index.html

Arie


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Ed Lazerus
Sent: Sunday, August 16, 2009 12:53
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Shape users over quota

Dear All,
We currently use 7300's as LNS's, we have for a few years worked on user
pays excess, like all businesses things change and so must we, we are
looking to offer new plans of use quota then we shape you down top
64/64kbps.

We have 3 PoPs, each have approximately 25-30K users, we would expect
around
10K users each PoP will need shaping based on current usage (which is
only
increasing).

Is this an easy task on the 7300 LNS's?  Or should we be looking more
towards dedicated special hardware for this task, if it helps, we are
soon
replace 7300  LNS's in at least one PoP with a ESR10K, the LNS's also
perform netflow for traffic accounting, the CPU's average around %50
each
router.

Thank you.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/