[c-nsp] Rmon checksum failed on WS-C4006

[Sony Scaria]

Hi All,

 

I've observed "Rmon checksum failed" when I run sh ver on one of my catos
switch. The system is stable for a long time and I did not observe any
related logs. I had done some research , but couldn't gather any info on
"Rmon checksum".

 

 

cat4013 > (enable) sh ver

WS-C4006 Software, Version NmpSW: 8.4(5)GLX

Copyright (c) 1995-2005 by Cisco Systems, Inc.

NMP S/W compiled on Jan 12 2005, 12:30:16

GSP S/W compiled on Jan 12 2005, 11:47:47

 

System Bootstrap Version: 5.4(1)

 

Hardware Version: 3.2  Model: WS-C4006  Serial #: FOXXXXXXX

 

Mod Port Model              Serial #              Versions

--- ---- ------------------ --------------------
---------------------------------

1   2    WS-X4013           JABXXXXXXXX          Hw : 3.2

                                                 Gsp: 8.4(5.0)

                                                 Nmp: 8.4(5)GLX

2   48   WS-X4148-RJ        JABXXXXXXX          Hw : 3.0

3   48   WS-X4148-RJ        JABXXXXXXX          Hw : 3.0

4   48   WS-X4148-RJ        JABXXXXXXX          Hw : 3.0

5   48   WS-X4148-RJ        JABXXXXXXX          Hw : 3.0

6   48   WS-X4148-RJ        JAEXXXXXXX          Hw : 2.3

 

       DRAM                    FLASH                   NVRAM

Module Total   Used    Free    Total   Used    Free    Total Used  Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1       65536K  40542K  24994K  16384K   5760K  10624K  480K  402K   78K

 

Rmon checksum failed.

 

Uptime is 323 days, 10 hours, 34 minutes

 

 

----------------------------------------------------------------------------
-------------------------------

 

cat4013> (enable) sh test

 

Diagnostic mode (mode at next reset:) complete

 

Environmental Status (. = Pass, F = Fail, U = Unknown, N = Not Present)

  PS1: .    PS2: .   PS3: .

  PS1 Fan: .    PS2 Fan: .   PS3 Fan: .

  PEM: N   Fan Tray: .

  Temperature: .        Chassis Temperature: 43 degC (110 degF)

                  Over Temperature Threshold: 75 degC (167 degF)

              Critical Temperature Threshold: 95 degC (203 degF)

 

Module 1 : 2-port 1000BaseX Supervisor

 POST Results

 Network Management Processor (NMP) Status: (. = Pass, F = Fail, U =
Unknown)

 Galaxy Supervisor Status : .

 CPU Components Status

   Processor              : .

   DRAM                   : .

   RTC                    : .

   EEPROM                 : .

   FLASH                  : .

   NVRAM                  : .

   Temperature Sensor     : .

 Uplink Port 1            : .

 Uplink Port 2            : .

 Me1  Status              : .

 EOBC Status              : .

 

 SCX1000 - 0

   Register               : .

   Switch Sram            : .

   Switch Gigaports

    0: .   1: .   2: .   3: .

    4: .   5: .   6: .   7: .

    8: .   9: .  10: .  11: .

 SCX1000 - 1

   Register               : .

   Switch Sram            : .

   Switch Gigaports

    0: .   1: .   2: .   3: .

    4: .   5: .   6: .   7: .

    8: .   9: .  10: .  11: .

 SCX1000 - 2

   Register               : .

   Switch Sram            : .

   Switch Gigaports

    0: .   1: .   2: .   3: .

    4: .   5: .   6: .   7: .

    8: .   9: .  10: .  11: .

 

 

  GBIC Status: (. = Pass, F = Fail, N = No Gbic, X = Non-Gbic Port)

 

   Ports  1  2

         ------

          .  .

 

cat4013> (enable)

 

 

Sony.