[c-nsp] [Suspected Spam] Rmon checksum failed on WS-C4006
Church, Charles
Charles.Church at harris.com
Sat Dec 5 10:38:07 EST 2009
I seem to remember CatOS 7.x and above needing a ROMMON version of 6.x or above. I don't think your 5.4(1) will do it. It's a downloadable upgrade.
Chuck
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Sony Scaria
Sent: Saturday, December 05, 2009 7:37 AM
To: cisco-nsp at puck.nether.net
Subject: [Suspected Spam][c-nsp] Rmon checksum failed on WS-C4006
Hi All,
I've observed "Rmon checksum failed" when I run sh ver on one of my catos
switch. The system is stable for a long time and I did not observe any
related logs. I had done some research , but couldn't gather any info on
"Rmon checksum".
cat4013 > (enable) sh ver
WS-C4006 Software, Version NmpSW: 8.4(5)GLX
Copyright (c) 1995-2005 by Cisco Systems, Inc.
NMP S/W compiled on Jan 12 2005, 12:30:16
GSP S/W compiled on Jan 12 2005, 11:47:47
System Bootstrap Version: 5.4(1)
Hardware Version: 3.2 Model: WS-C4006 Serial #: FOXXXXXXX
Mod Port Model Serial # Versions
--- ---- ------------------ --------------------
---------------------------------
1 2 WS-X4013 JABXXXXXXXX Hw : 3.2
Gsp: 8.4(5.0)
Nmp: 8.4(5)GLX
2 48 WS-X4148-RJ JABXXXXXXX Hw : 3.0
3 48 WS-X4148-RJ JABXXXXXXX Hw : 3.0
4 48 WS-X4148-RJ JABXXXXXXX Hw : 3.0
5 48 WS-X4148-RJ JABXXXXXXX Hw : 3.0
6 48 WS-X4148-RJ JAEXXXXXXX Hw : 2.3
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 65536K 40542K 24994K 16384K 5760K 10624K 480K 402K 78K
Rmon checksum failed.
Uptime is 323 days, 10 hours, 34 minutes
----------------------------------------------------------------------------
-------------------------------
cat4013> (enable) sh test
Diagnostic mode (mode at next reset:) complete
Environmental Status (. = Pass, F = Fail, U = Unknown, N = Not Present)
PS1: . PS2: . PS3: .
PS1 Fan: . PS2 Fan: . PS3 Fan: .
PEM: N Fan Tray: .
Temperature: . Chassis Temperature: 43 degC (110 degF)
Over Temperature Threshold: 75 degC (167 degF)
Critical Temperature Threshold: 95 degC (203 degF)
Module 1 : 2-port 1000BaseX Supervisor
POST Results
Network Management Processor (NMP) Status: (. = Pass, F = Fail, U =
Unknown)
Galaxy Supervisor Status : .
CPU Components Status
Processor : .
DRAM : .
RTC : .
EEPROM : .
FLASH : .
NVRAM : .
Temperature Sensor : .
Uplink Port 1 : .
Uplink Port 2 : .
Me1 Status : .
EOBC Status : .
SCX1000 - 0
Register : .
Switch Sram : .
Switch Gigaports
0: . 1: . 2: . 3: .
4: . 5: . 6: . 7: .
8: . 9: . 10: . 11: .
SCX1000 - 1
Register : .
Switch Sram : .
Switch Gigaports
0: . 1: . 2: . 3: .
4: . 5: . 6: . 7: .
8: . 9: . 10: . 11: .
SCX1000 - 2
Register : .
Switch Sram : .
Switch Gigaports
0: . 1: . 2: . 3: .
4: . 5: . 6: . 7: .
8: . 9: . 10: . 11: .
GBIC Status: (. = Pass, F = Fail, N = No Gbic, X = Non-Gbic Port)
Ports 1 2
------
. .
cat4013> (enable)
Sony.
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list