[c-nsp] Ethernet VPN circuits

[Dean Smith]

Cant speak for your product...but in the UK we've used similar from the 4 or
5 biggest suppliers at the all work the same...

At the central site access is delivered over a single high B/W Trunk. We
(Customer) and supplier agree a vlan tag per site.
At the remote site the port is provided with no vlan tag.
0
So if we have single IP connection between there is no multiple VLAN tags.
Router at the central site - configure your IP interface as Vlan
subinterface on CS Router. Trunk Between CS Router & CS Switch. Configure CS
Switch port facing provider as trunk aswell. (Control the VLANs you want to
send etc on each trunk port). The CS Switch is optional. (we do actually
have these for various reasons - but will be phasing them out in new core
site builds).

At the Remote site its just a straight Ethernet port. Not sure why you'd use
the RS Switch at all.

Dean

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Rens
Sent: 04 February 2009 12:27
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Ethernet VPN circuits

Hi,

 

We have a provider that has a new product and I would like to know if I
could use it with our current infrastructure to interconnect sites.

 

This is how it works on the provider site:

 

1 Central Site where everything arrives

Multiple Remote Sites that you can connect to the Central Site

 

Per Remote Site we have to define a VLAN tag.

 

So it would look like this:

 

My CS router     <=> my CS switch           <=> provider CS switch     <=>
provider Backbone     <=> provider RS switch     <=> My RS router

7206VXR           <=> 3550                         <=> 2960
<=> No Idea                     <=> 2960                         <=> 1841

 

So if I want to do a /30 OSPF between my CS router and my RS router

I would use vlan 200 for this at RS router (subinterface dot1q) it enters
the provider RS switch and they add the predefined vlan as outer tag.
(example 800)

It arrives like this at my CS site and now I have a problem.

 

1) I either remove the outer tag VLAN (800) on the switch so on my router I
can do the same subinterface dot1q 200 => but this won't work when I want to
do the same thing with multiple RS

2)  Can I pass the double tag through my switch to our 7206 and configure a
double dot1q subinterface, so the router removes both outer & inner 800 &
200 and OSPF goes up :-)

 

Any help is appreciated.

 

Regards,

 

Rens

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/