[c-nsp] Which QoS/Shaping is actually supported on ME3400?

[Raymond Macharia]

Hi,you may need to change the IOS to the METROIPACCESS version.

Regards

Raymond

On Wed, Jan 21, 2009 at 10:37 AM, Garry <gkg at gmx.de> wrote:

> Hi,
>
> I'm playing with an ME3400 in our Lab, trying to set up some QoS/Shaping
> stuff ... I want to see whether I can limit the throughput on the uplink
> port (using G0/1 for that, or rather, ether-channeled g0/1+2) to any
> value, not shaping a certain protocol/service, but rather the whole
> link. I've tried all the logical choices, like vlans, IP traffic, etc.,
> but somehow all I get when I try to set up the policy-map for the port
> is the error that that kind of class is not supported on the interface
> ... as I can't seem to find any decent explanation in the manual
> entries, I'm wondering which classes are actually configurable on an
> ME3400 ...
> n.b.: I'm using the MetroAccess IOS 12.2.46 on it ...
>
> Tnx, -garry
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
Raymond Macharia