[c-nsp] need help with 6509-E with WS-SUP32-GE-3B

[Childs, Aaron]

Hi Renelson,
  What's the configuration register set to? (sh boot) once you're in IOS.  0x0 will bring you to rommon everytime, 0x2102 will boot the sup using the config file.

Aaron

-------------
Aaron Childs
Assistant Director, Networking
Westfield State College
http://www.wsc.ma.edu/it/


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Renelson Panosky
Sent: Wednesday, June 10, 2009 12:41 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] need help with 6509-E with WS-SUP32-GE-3B

I Have a brand new 6509-E with WS-SUP32-GE-3B booting up in rommon> mode i
was able to type the command boot so it can look for the right code to boot
up but after i configured the switch i turned off and turned it back on,  it
boot up in rommon mode again and everything was lost.  I know someone had
upgraded the IOS and i am sure that's what causing the problem and i know
there is command i can type to fix the problem but i can't remember it or
find it on the web can someone please help me out with this ?

Renelson
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/