[c-nsp] Link state propagation / remote port shutdown with EoMPLS on 6500

[Manu Chao]

AToM Remote Ethernet Port Shutdown Feature supported on CRS-1, XR 12K, 10K,
12K, 7200 NPE-G2
-> not supported on 6500
On Thu, Jun 18, 2009 at 1:41 PM, John <fraglet at gmail.com> wrote:

> Hi All
> Im playing around with EoMPLS on 6500`s w/SUP720-3b and 6700 line cards...
> No ES hardware.
>
> Everything seems fine, performance is good, scales ok for what we need,
> what
> I`m failing to do is get link state propagation or remote port shutdown to
> work.
>
> Anybody have any pointers on this..
>
> Our config is very basic port mode xconnects..
>
>
> interface GigabitEthernet1/12
>  mtu 1560
>  no ip address
>  xconnect 192.168.1.1 2007 pw-class TEST#1
>
>
> I notice that in conf mode under the xconnect config you can enter "remote
> link failure notification" this seems to be enabled by default, but doesnt
> seem to do anything..
>
> I imagine that I need to configure some OAM or CFM or similar, but am at a
> loss as to how, anyone thats already done it?
>
> Any help gratefully accepted
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>