[c-nsp] Cisco 4900M onboard X2 and twingig convertors

[Tom Lanyon]

On 22/06/2009, at 9:15 PM, Sam Stickland wrote:

> Hi,
>
> Is anyone able to confirm whether the onboard X2 slots on the 4900M  
> support the twin-gig modules?
>
> Some of the documentation suggests they are only supported on the 8- 
> Port (2:1) 10 Gigabit Ethernet (X2) Half Card, but I haven't seen  
> any that definitively rules out there use on the onboard slots.
>
> Thanks,
>
> Sam

All the documentation for the 4900M insists that they only work in the  
8-port card, but I've not tested them in any of the other cards or in  
the base chassis.

-Tom