[c-nsp] 7600 eigrp offset-list problem

luismi asturluismi at gmail.com
Wed May 13 09:59:27 EDT 2009

Same IOS here, similar code...
We use under address-family...
  offset-list 0 out 25 Port-channel1.xxx

We will take a look to the config after a reboot. 
We didn't reboot the router yet.
Do you know if it is a well know bug?
Did you open a SR to ask for a reason for this behaviour?

El mié, 13-05-2009 a las 14:23 +0300, Dan Sabau escribió:
> Hi,
> we have the following problem, if a router reboots when it comes online 
> the part of the config with the offset-list within router eigrp is 
> ignored, you have to do something like:
> conf t
> router eigrp X
> no  offset-list permit-any in 128257 Vlan2764
>  offset-list permit-any in 128257 Vlan2764
> Does any body know how to fix it?
> The ios is: 12.2(33)SRC1 we have tried SRBx and the problem was there too.
> 10x

More information about the cisco-nsp mailing list