[c-nsp] Bonded T1 Circuits

[Tony Varriale]

Looks like I'm late to the game but I would recommend MLPPP.  Note the EC 
card has the MLPPP offload so I would stick with those.

The only thing to be aware of is always turn off frag (I believe you have 
received config examples of this).

http://www.cisco.com/en/US/prod/collateral/modules/ps2033/prod_white_paper0900aecd8056d3cb.html

tv
----- Original Message ----- 
From: "Dominic" <dominic at broadconnect.ca>
To: <cisco-nsp at puck.nether.net>
Sent: Tuesday, October 20, 2009 10:05 AM
Subject: [c-nsp] Bonded T1 Circuits


> Hi Everyone:
>
> Two questions:
>
> 1. I need to bond two T1 circuits. Does anyone have a working sample 
> config? The POP end is a 7206VXR with NPE-G2 and the PA-MC-2T3-EC Card, 
> and the customer end is a Cisco 1841.
> 2. Also need to bond as many as 4 T1s.  Would that be pushing it, and what 
> would generally be the cleanest way to do it?
>
>
> Dominic
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/