[c-nsp] Problems with dot1q trunk over EoMPLS with WS-X6148-GE-TX

[Gert Doering]

Hi,

in addition to what Arie said:

On Sun, Aug 08, 2010 at 01:02:46PM +0200, Marco Matarazzo wrote:
> Router1#sh run int fa 2/32
> Building configuration...
> 
> Current configuration : 245 bytes
> !
> interface FastEthernet2/32
>  description -VC-71172104--
>  no ip address
>  ip verify unicast source reachable-via any allow-default
>  no ip redirects
>  no ip proxy-arp
>  xconnect x.y.z.56 71172104 encapsulation mpls

... just put "mtu 1504" here, to take into account that a full-sized 
ethernet frame *plus* dot1q header is just bigger than without... :-)

(Been there, cursed, found the answer)

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 305 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20100808/4cc94f24/attachment.bin>