[c-nsp] CAT6509 module position in chassis

Harald Firing Karlsen maillist at thelan.no
Thu Aug 12 08:42:18 EDT 2010


  Hi Pavel.
> is there any recommended/best practices for module placement in
> CAT6509 chassis?  For example, FWSM in slot 3, ACE in slot 2 etc etc..
The Catalyst 6500 (and 7600) reserves power for supervisors in both slot 
5 and 6 even if you only have one sup. This means you should use the 
available slot for a linecard if you only plan on running one sup and a 
small PSU to not waste "reserved watts" on a blank slot.

Maybe not the kind of information you were looking for, but still 
noteworthy.

-- 
Harald Firing Karlsen




More information about the cisco-nsp mailing list