[c-nsp] Bridging 802.1q tagged Ethernet traffic to multiple T-1 in a DS-3

[Keegan Holley]

I'm sure someone will correct me if I'm wrong but I didn't think there was a
way to exclude vlans on a bridge group. Depending on the number of vlans you
could break them out into physicla ports and the create different bridge
groups for each T1 interface.

On Wed, Nov 17, 2010 at 4:50 PM, Frank Bulk <frnkblk at iname.com> wrote:

> Is it possible to use a Cisco 7206VXR to bridge 802.1q tagged Ethernet
> traffic to multiple T-1s within a DS-3?  The remote end, a RNC, can
> apparently take tagged traffic over multiple T-1's.
>
> We might be willing to live with the restriction of assigning certain T-1's
> within the DS-3 to a certain 802.1q, but would like to take advantage of
> aggregation.
>
> Apparently we can't use PVCs, otherwise I would prefer that approach.
>
> Frank
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>