[c-nsp] how to connect vss-setup via mpls core

[David Hughes]

On 18/01/2010, at 3:47 AM, Brad Hedlund wrote:

> Arne,
> 
> Since IOS version 12.2(33)SXI2 we now support MPLS in a VSS configuration.
> This means you can now connect your VSS pair in Data Center 1 to the VSS pair in Data Center 2 with a port channel using EoMPLS.  

Brad

Is this still just port-based EoMPLS?  i.e do you still need to use "external loopback"  (i.e. a cross-over back to the same box) to present packets to the PW?


Thanks

David
...