[c-nsp] list interface type via snmp?

[Ryan West]

D.J.

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of D.J. O'Berry
> Sent: Saturday, July 17, 2010 1:46 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] list interface type via snmp?
> 
> Hello all,
> 
> I have a Cisco 7204 router. I am monitoring this device via nagios.
> However, I wish to monitor individual ports on the router via snmp as well. I
> have studied Cisco's SNMP page, but, is there an easier way to matchup the
> ports by list in the router or via snmp? My router also terminates
> PPPoE/PPPoA and has several Virtual interfaces created at all times. I'm
> having trouble finding with interface number in an snmpwalk is which
> interface.
> 
> 
> What I'm looking for is a way to list out each port with it's corresponding mib,
> 

Try 'show snmp mib ifmib ifindex detail', you should also enable 'snmp-server ifindex persist' to make sure your index numbers don't change in the future.

-ryan