[c-nsp] list interface type via snmp?

[D.J. O'Berry]

Thanks Ryan,

This did the trick.

On 7/17/2010 2:38 PM, Ryan West wrote:
> D.J.
>
>    
>> -----Original Message-----
>> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
>> bounces at puck.nether.net] On Behalf Of D.J. O'Berry
>> Sent: Saturday, July 17, 2010 1:46 PM
>> To: cisco-nsp at puck.nether.net
>> Subject: [c-nsp] list interface type via snmp?
>>
>> Hello all,
>>
>> I have a Cisco 7204 router. I am monitoring this device via nagios.
>> However, I wish to monitor individual ports on the router via snmp as well. I
>> have studied Cisco's SNMP page, but, is there an easier way to matchup the
>> ports by list in the router or via snmp? My router also terminates
>> PPPoE/PPPoA and has several Virtual interfaces created at all times. I'm
>> having trouble finding with interface number in an snmpwalk is which
>> interface.
>>
>>
>> What I'm looking for is a way to list out each port with it's corresponding mib,
>>
>>      
> Try 'show snmp mib ifmib ifindex detail', you should also enable 'snmp-server ifindex persist' to make sure your index numbers don't change in the future.
>
> -ryan
>
>