[c-nsp] %ERROR: Standby doesn't support this command

[Church, Charles]

Anyone,

	I'm having issues with some 4510s with dual Sup6-E running
12.2(53)SG2 doing this on interface range command.  Making our deployment
kind of tough:

SCUAS01(config-if)#interface range GigabitEthernet1/1 - 48
SCUAS01(config-if-range)# switchport mode access
%ERROR: Standby doesn't support this command
% Command failed on interface. Aborting
SCUAS01(config)# 

In the release notes it claims a similar issue was fixed:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_51
84.html        CSCsa67042   But that's from a while ago.  I'm told by our
installer guy that occasionally it is accepted, seems to depend on if the
switch was recently rebooted, he claims.  The interface type is correct.  I
tried using bug navigator, but it's not giving me any results, not sure if
it's working right today, or if I've got a browser issue.  Any help
appreciated.

Thanks,

Chuck 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 6595 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20100730/a932c89d/attachment-0001.bin>