[c-nsp] Console problems

[Anh Khoa Le Viet]

what is the terminal you are using? Try with other Terminals like putty,
hyperTerminal ... sometimes I faced the same issue with Cisco APs and
switched to HyperTerminal then everything was working fine.

Regards,
Khoa

On Thu, Jun 17, 2010 at 10:04 AM, Richey <mylists at battleop.com> wrote:

> I can't seem to come up with the right keyword combination to google this.
> I've got a 7206VXR with an NPE-400 and an I/O 2FE/E card.  Using a Belkin
> USB to Serial adaptor I can watch the router boot and get to the Press
> Return to get Started prompt.  After I hit return the interfaces go up and
> then admin down.  After that I can't get anything out of the console.   I
> can insert and remove a DS3 card and I will see a message saying the card
> was inserted and removed but I can't interact with the box.   I've
> connected
> to a 3550 I have laying here and I am able to get a console session going
> with it.     Does anyone have any ideas on this one?   Everything I am
> googleing relates to the router crashing or hanging which this one does not
> seem to do.
>
> Richey
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>