[c-nsp] CRC16 in 'show cont fia' on GSR 12810

[Shimol Shah]

Cisco 12010, Cisco 12410, and Cisco 12810 Router Clock and Scheduler, 
Switch Fabric, and Alarm Card Replacement Instructions

http://www.cisco.com/en/US/docs/routers/12000/12010s/maintenance/guide/15874csa.html#wp40448

Hope that helps.

Shimol

On 3/31/10 3:52 PM, Clinton Work wrote:
>
> My usual plan of attack is to capture "execute on all show controller
> fia". If all the linecards are seeing incrementing CRC16s to the same
> SFC then the SFC is likely the problem. If only one linecard is seeing
> CRC16 errors to one or more SFCs then I would suspect the linecard or
> how well is seated in the chassis. A bad CSC or bent slot pins can
> create problems very difficult to diagnose. Next steps if you can't
> isolate to a specific SFC / linecard would be to switch the master CSC
> and then try moving the linecard to another spare slot.
>
> Clinton.
>
>
>
> On 2010-03-31 12:29, Sascha E. Pollok wrote:
>>
>> was that "sh contr fia" you posted as seen from slot 1? i.e.
>> execute-on sl 1 sh contr fia ?
>>
>> Sascha
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/