[c-nsp] Running two VPN clients on PC

[Michael Loftis]

On Fri, Nov 5, 2010 at 1:30 PM, Jay Nakamura <zeusdadog at gmail.com> wrote:
> I have been running Cisco IPSec client and Anyconnect client at the
> same time on XP lately so I can connect back to the office and connect
> to customer network at the same time and it works great.  However,
> once I went to Win7, I noticed that if you are already connected via
> Anyconnect, and connect via IPSec client, IPSec client doesn't work.
> Once you disconnect Anyconnect, and recoonect the Anyconnect, both
> connection works.  Anyone else seen this symptom?  Any possible fix?

My guess is that your Anyconnect VPN wasn't getting set as a default
route, but now is.  Or something similar to that.  IE you're ending up
with a VPN-inside-a-VPN where you (somehow) weren't before.  Probably
not really a Win7 issue but my experience with Win7 is that it is
really good at hiding the ball when it comes to networking and making
it really difficult to get anything more complicated than 'plug in the
wire' to work correctly.