[c-nsp] MSC Cisco CRS-1

Alessandro Braga sandro.unix at gmail.com
Fri Feb 11 11:24:07 EST 2011


oww!
thanks even.

Rgs,
AB

2011/2/11 nsp.lee <nsp.lee at gmail.com>

>  RP/0/RP0/CPU0:XXX#show  license
>
> FeatureID: CRS-MSC-40G-IMP (Slot based, Implicit[Remaining time: unlimited])
>   Total licenses 3
>   Available for use         0
>   Allocated to location     0
>   Active                    3
>     Pool: Owner
>       Total licenses in pool: 3
>       Status: Available     0    Operational:    3
>       Locations with licenses: (Active/Allocated) [SDR]
>               0/9/CPU0        (1/0) [Owner]
>               0/8/CPU0        (1/0) [Owner]
>               0/0/CPU0        (1/0) [Owner]
>
>
>
>  RP/0/RP0/CPU0:XXX#show diag  0/0/CPU0
>  CARD 0/0/* : Cisco CRS-1 Series Modular Services Card revision B
>   MAIN:  board type 500063
>          800-27067-06 rev A0
>          dev N/A
>          S/N SADXXXXXXXX
>   PCA:   73-10334-06 rev A0
>   PID:   CRS-MSC-B
>   VID:   V04
>   CLEI:  IPUCALFBAC
>   ECI:   168422
>  PLIM 0/PL0/* : Cisco Carrier Routing System SPA Interface Processor Card
>   MAIN:  board type 580070
>          800-23819-06 rev C0
>          dev N/A
>          S/N SADXXXXXXXX
>   PCA:   73-8982-08 rev C0
>   PID:   CRS1-SIP-800
>   VID:   V04
>   CLEI:  COUIANKCAB
>   ECI:   165066
>   Interface port config:  0 Ports
>   Optical reach type:  Unknown
>   Connector type:  Unknown
>  NODE 0/0/CPU0
>   Node State : IOS XR RUN
>   PLD:   Motherboard: 0x0015, Processor: 0x0015, Power: N/A
>   MONLIB: QNXFFS Monlib Version 3.1
>   ROMMON: Version 1.53(20090311:225342) [CRS-1 ROMMON]
>   MEM Size: 2048 Mbytes
>
>
> 2011-02-11
> ------------------------------
>  even.lee
> ------------------------------
> *发件人:* Alessandro Braga
> *发送时间:* 2011-02-11  23:36:14
> *收件人:* cisco-nsp
> *抄送:*
> *主题:* [c-nsp] MSC Cisco CRS-1
>   Dear,
>  which the command can I use in IOS-XR (CRS-1) to obtain MSC details; eg
> Performance (20G,40G, 140G).
>  The commands bellow don't show it:
> show inventory
> show version
>  I think that 'show diag ?' will show, I'm correct?
>  Brgs,
> Alessandro Braga
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


More information about the cisco-nsp mailing list