[c-nsp] NAT over Two different providers

[Jeff Cartier]

You could use a combination of NAT and IP SLAs with static routes and track statements.


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of jacob miller
Sent: Monday, July 11, 2011 9:59 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] NAT over Two different providers

Hi,

Am having the following scenario which I need assistance in solving.

I have two Internet service providers each of which has provided a /29 set of public IP addresses.

I would like to use Link A (ISP A) as the main link and Link B (ISP B) as my back up.

I would like to do this automatically such that users on the LAN do not detect that one link is down.

My LAN is on Private IP address range is beign NATed on the ISP's.

Regards,
Jacob Miller
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
__________________________________________________________________
DISCLAIMER: This e-mail contains proprietary information some or all of which may be legally privileged.  It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail.  If you are not the intended recipient you must not use, disclose, distribute, copy, print, or rely on this e-mail.

This message has been scanned for the presence of computer viruses, Spam, and Explicit Content.