[c-nsp] PWE3 suggestions?
Murphy, Jay, DOH
Jay.Murphy at state.nm.us
Wed May 18 18:03:54 EDT 2011
Apparently these Cisco devices support pseudo wire:
Cisco 2650XM, Cisco 2651XM, Cisco 2691, Cisco 3660 Series, Cisco 3725, and Cisco 3745 Routers
Cisco 7200 Series Routers
Cisco 7500 Series Routers
Cisco AS5800 Access Servers and Cisco 10000 Series Routers
~Jay
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mike
Sent: Wednesday, May 18, 2011 2:52 PM
To: 'Cisco-nsp'
Subject: [c-nsp] PWE3 suggestions?
Hi all,
I have an adtran TA5000 and it's got a 32 port t1 card that does
pseudowire. Adtran itself can't seem to give me any usage guidelines or
examples using anything for pwe3 other than their own (non-desireable)
mx480 product. We want to have a 7200 or something else in the cisco
family that can take t1's over pseudowire and route and such but we are
having a hard time figuring this out. Is there anyone who has PWE3
experience or can reccomend something in the cisco family we might use
here? We don't need gigabits per second, just something we can aggregate
subscribers on pseudowire t1's.
Thanks.
Mike-
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list