[c-nsp] Cisco 6509-E w/ VS-S720-10GE Password recovery

[Renelson Panosky]

Thank you Mr. Soares

your suggestion works perfect.. I greatly appreciate it.

Renelson

On Tue, Nov 8, 2011 at 1:21 PM, Chuck Church <chuckchurch at gmail.com> wrote:

> Could be lots of reasons.  Is a redundant sup taking over?  Are you setting
> the config register on the SP or the RP?  If you set the SP and not the RP,
> the MSFC will boot normally with config and password prompt you.  There are
> docs on CCO that cover this all pretty well.
>
> Chuck
>
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Renelson Panosky
> Sent: Tuesday, November 08, 2011 12:54 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Cisco 6509-E w/ VS-S720-10GE Password recovery
>
>  Good day
>
> I managed to lock myself out of this switch i am configuring however it's
> not taking the following
>
> control break
> rommon 1> confreg 0x2142
> rommon 2> reset
>
> do anybody in here know the configuration registry code because 0x2141 is
> not working.  Please help
>
> Thanks
> Renelson
>  _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>